사용자:배우는사람/틀:Convert/설명문서

Usage

This template shows measurement quantities as primary and converted secondary units (or ranges), with optional rounding, wikilinks, abbreviation, or US spellings, and various separators including:  parentheses (round brackets), slash, "or", hyphens, comma, "to" or dashes. Styles include: distance "32 metres (105 ft)" and "32 metres or 105 ft"; temperature "18 °C (64 °F)" or "18 °C/64 °F"; weight "55.0 kg (121 lb)" or "65 to 80 kg (140 to 180 lb)"; etc. For units see: 사용자:배우는사람/틀:Convert/list of units.

Options include:

lk=in, abbr=on, sp=us, adj=on, adj=mid, disp=or, disp=table and sortable=on (explained below). By default, output is rounded to match the precision of input; alternatives include: sigfig=3 or using the end parameter, e.g. appending -2 to show full hundreds.

Single value:

{{convert|original_value|original_unit|conversion_unit|round_to|...}}

Range of values (see below for list of range options):

{{convert|orig_val1|range|orig_val2|original_unit|conversion_unit|round_to|...}}

• Numbers must be entered in unformatted form (without commas). For negative numbers (i.e. temperatures or precision) use a hyphen as the minus sign for the input number. Values output by the template will be displayed formatted and with a true minus sign where appropriate. To specify with commas, re-code a number as {{formatnum:9,000,500|R}} (becomes 9000500).
• Optional parameters, in examples below, allow abbreviated units (abbr=on), or US spellings (sp=us for meter), or slash separation (disp=s), or hyphenation (adj=on), etc.
• For this template many levels of substitution are possible, hence doing this fully, step by step, is cumbersome. Use Special:ExpandTemplates instead.
• The template has no in-built capacity for dimensional analysis. It is therefore up to the user to ensure that the input and output units are compatible. Do not, for example, attempt to convert barrels to tonnes (but see {{사용자:배우는사람/틀:Bbl to t}}). Also beware of units with similar names; the code oz, for example, is for the avoirdupois ounce (a unit of mass), do not use this if you want fluid ounces.
• An attempt to convert a unit to itself (e.g. km to km), will result in a template loop.
• The range functionality is not fully implemented for all units, so experimentation may be required.
• This documentation page tends to lag behind in terms of what the template can do. For details see the talk page and its archives.

Examples

Single value

Input	Displays as
{{사용자:배우는사람/틀:convert|3.21|kg|lb}}	3.21 kilograms (7.1 lb)
{{사용자:배우는사람/틀:convert|3.21|kg|lb|0}}	3.21 kilograms (7 lb)
{{사용자:배우는사람/틀:convert|10|kg |lb |disp=or}}	10 kilograms or 22 lb
{{사용자:배우는사람/틀:convert|6|ft|5|in|m}}	6 feet 5 inches (1.96 m)
{{사용자:배우는사람/틀:convert|10|mi}}	10 miles (16 km)
{{사용자:배우는사람/틀:convert|100|mpgus}}	100 miles per US gallon (2.4 L/100 km; 120 mpg-imp)
{{사용자:배우는사람/틀:convert|120|km/h}}	120 kilometres per hour (75 mph)
{{사용자:배우는사람/틀:convert|18|°C|°F}}	18 °C (64 °F)
{{사용자:배우는사람/틀:convert|1250|sqft|m2|lk=in|sigfig=2}}	1,250 square feet (120 m2) Note 'lk=in' links only the input unit. This example is for illustration only, common units of measurement should not be linked. See: wp:overlink.
{{사용자:배우는사람/틀:convert|20.5|m3|cuyd|lk=out|abbr=on}}	20.5 m3 (26.8 cu yd) Note 'lk=out' links only the output unit, cu yd.
{{사용자:배우는사람/틀:convert|641|acre|km2 sqmi|lk=on}}	641 acres (2.59 km2; 1.002 sq mi) Note 'lk=on' links all units. Per guidelines, common units should not be linked. See: wp:overlink.
{{사용자:배우는사람/틀:convert|641|acre|km2 sqmi|2|lk=on}}	641 acres (2.59 km2; 1.00 sq mi) Although 640 acres equals 1 square mile; 641 acres rounded to two decimal places equals 1.00 sq mi.

Range of values

Note: not yet operational for all units

Input	Displays as
{{사용자:배우는사람/틀:convert|60|and|170|kg|lb}}	60 and 170 kilograms (130 and 370 lb)
{{사용자:배우는사람/틀:convert|60|to|170|kg|lb}}	60 to 170 kilograms (130 to 370 lb)
{{사용자:배우는사람/틀:convert|60|to(-)|170|kg|lb}}	60 to 170 kilograms (130–370 lb)
{{사용자:배우는사람/틀:convert|60|-|170|kg|lb}}	60–170 kilograms (130–370 lb)
{{사용자:배우는사람/틀:convert|41|to|50|F|C}}	41 to 50 °F (5 to 10 °C)
{{사용자:배우는사람/틀:convert|41|-|50 |F|K}}	41–50 °F (278–326 K)
{{사용자:배우는사람/틀:convert|60|x|120|m|ft}}	60 by 120 metres (200 × 390 ft)
{{사용자:배우는사람/틀:convert|60|+/-|10|m|ft}}	60 ± 10 metres (200 ± 33 ft)
{{사용자:배우는사람/틀:convert|19|to|27|L|USgal}}	19 to 27 litres (5.0 to 7.1 USgal)
{{사용자:배우는사람/틀:convert|5|to|7|L|USgal|abbr=mos}}	5 litres to 7 litres (1.3 to 1.8 USgal)
{{사용자:배우는사람/틀:convert|4|-|9|L|USgal|abbr=none}}	4–9 litres (1.1–2.4 US gallons)

The following conversions are currently not available as a range of values:

• Some imperial and US gallon-based units
• Fuel consumption units (mpg, L/100km)
• Large scale units (e3, e6, e9)
• Combination-based units (ft&in, st&lb, lb&oz) due to complexity of the conversion

Parameters

Parameters
Use US spelling	attach |sp=us
Make units wikilinked	attach |lk=on   to link all units                               (default: lk=off) attach |lk=in   to link only the input units attach |lk=out  to link only the output units (The manual of style suggests that you should not link common units of measurement).
Use the adjective form, or insert mid-text words	attach |adj=on (e.g. "The 190-foot (58 m) bridge" as opposed to "The 190 feet..."). This produces the adjective form—the unit name in the singular with a hyphen (according to the Manual of Style). attach |adj=mid (e.g. "The 190-foot bridge (58 m)" as: |adj=mid|bridge, or "The 190-foot-long bridge (58 m)" as: |adj=mid|-long bridge)          Any rounding-parameter should follow the mid-text: "text|0".
Abbreviate units, or not	attach |abbr=on       to show unit symbols          (default: abbr=off) attach |abbr=none   to show all unit names in full words attach |abbr=in       to abbreviate input units attach |abbr=out     to abbreviate output units attach |abbr=values    to suppress unit names & show only values. So, {{사용자:배우는사람/틀:convert|6|mi|abbr=values}} gives: 6 (9.7).
Change "( )" to display other separators	disp=comma    to put comma, not brackets/parentheses attach |disp=or          to put "or" between units attach |disp=s (or |disp=/) for slash (e.g. 190 foot/58 metre). The default value is:  disp=b for brackets/parentheses.
Change "( )" to customized separators	disp=x| (begin | end)     to show "xx (begin yy end)" attach |disp=x|;                               to show "xx; yy" attach |disp=x| (same as |)         to show "xx (same as yy)".
Display output only	disp=output only                   to show result number & unit attach |disp=output number only     to show just number Note when using "disp=output only" then the unit name can still be shown as full words by abbr=none, or linked by lk=on.
Display units inverted as reverse order	disp=flip        to reverse the order & show output unit first So, {{사용자:배우는사람/틀:convert|6|km|disp=flip}} shows "3.2 mi (6 kilometres)". To get symbol "km" use abbr=in, to abbreviate the input unit.
Display unit name (only)	disp=unit         to show the unit name for a symbol The unit name will be plural when the amount is not 1, or hyphenated when adj=on. So, {{사용자:배우는사람/틀:convert|2|cuyd|disp=unit}} shows "cubic yards" plural.
Display amounts as table cells	disp=table (or |disp=tablecen) Note: For use in tables, the template must start on a new line after a pipe. Only the number will be displayed unless you set |abbr=on, |lk=on, |lk=in or |lk=out. Example: here
Round to a specified number of significant figures	attach |sigfig={some non-negative integer}. In the case of temperatures Celsius or Fahrenheit this refers to the difference with the absolute-zero temperature. For example, at room temperature two significant digits means rounded to tens of degrees.
Round by 5	disp=5  to round the output amount to the nearest 5 units. Not supported for all options.
Let Convert decide the unit to convert to	put zero (0) or skip the convert to parameter (the 3rd unnamed parameter) e.g. {{사용자:배우는사람/틀:convert|100|mi|0}} gives 100 miles (161 km).
Display input value with a fraction	{{사용자:배우는사람/틀:convert|3/8|in|mm|3|abbr=on}}→ 3⁄8 in (9.525 mm) or {{사용자:배우는사람/틀:convert|11+1/4|in|cm|2|abbr=on}}→11+1⁄4 in (28.58 cm) For negative amounts, use 2 minus signs: -11-1/4.
Generate a hidden sort key for use with a sortable table	attach |sortable=on to generate a hidden sort key (in the form of <span style="display:none">00000005</span>) so that sortable tables will sort correctly. This takes the first numeric value and left pads it with zeros to 16 places. It ignores any additional values, ie, if you use 6|ft|2|in as the value, it will only use the 6 for the sort key. This will cause numeric values to sort in numeric order, ie: 5, 10, 15 instead of 10, 15, 5.

Parameters still under construction

Parameters still under construction. May not work in all situations
Round by 5	disp=5  to round output to nearest 5 units. Might not work when linking unit names.
disp=tablecen	Similar to disp=table except that the values with be centered within the column. See the tables at La Nouvelle branch, BM-21 Grad for in use examples.
disp=comma	Similar to disp=s except the two values will be separated by a comma, for situations where the first value is already within parentheses. See the Geography tables on Labrador for an example.
abbr=in	Abbreviates only the input unit.
abbr=out	Abbreviates only the output unit.
abbr=comma	Abbreviates (removes) commas. This is a limited, temporary option, until comma=off can be implemented. For ranges, using abbr=comma conflicts with internal options, so instead, append "nocomma" to a range-word: tonocomma, bynocomma, andnocomma, -nocomma & xnocomma.
abbr=mos	For ranges, abbreviates with the input unit repeated, twice. Not to be confused with the specifications at MOS:NUM#Conventions.

Rounding

Convert supports four types of rounding:

Rounding to a given precision

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest power of 1/10 this number. For instance, if the result is 8621 and the round number is '-2', the result will be 8600. If the result is '234.0283043' and the round number is '0', the result will be 234.

Rounding to a given number of significant figures

Specify the desired number of significant figures using |sigfig={some non-negative integer} as noted above.

Combine both of the above

If both the desired precision and the desired number of significant figures are specified, the conversion will be rounded to the least precise of these.

Default rounding

If neither the desired precision nor the desired number of significant figures are specified, the conversion will be rounded either to a comparable precision as the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is the most precise. An exception to this is temperature wherein the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is the most precise.

Units supported

See also: 사용자:배우는사람/틀:Convert/list of units

The table below lists units supported by this template. It is divided up according to the quantity being measured. Not all supported units are listed here; there are links to complete lists for each quantity.

The codes listed in the code column (column 3) are accepted as input by the template. These can be used as the second or third unnamed parameter. For some units there exist alternative codes. These are listed in brackets and have been incorporated to make the code more flexible for editors, e.g. °F or F may be entered.

The codes listed in the combinations column (column 7) can be used to produce multiple conversions. They can only be used as the third unnamed parameter, e.g. {{사용자:배우는사람/틀:convert|55|nmi|km mi}} produces "55 nautical miles (102 km; 63 mi)".

Abridged list of units supported by {{사용자:배우는사람/틀:Convert}}
Explanation
system	unit	code (alternative)	symbol/abbreviation	notes	conversion factor	combinations
the system(s) to which the unit belongs	units listed by name	codes that can be entered when using the template	symbols/abbreviations as displayed by the template	notes which may pertain to the units in general or specifically to their use in this template	conversion factors used by the template to convert to and from the SI base unit	codes for multiple conversions
LENGTH (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/m	combinations
SI	megametre	Mm	Mm	US spelling: megameter	1,000,000
	kilometre	km	km	US spelling: kilometer	1,000	km mi
	metre	m	m	US spelling: meter	1	m ft m ftin
	centimetre	cm	cm	US spelling: centimeter	0.01	cm in
	millimetre	mm	mm	US spelling: millimeter	0.001	mm in
	micrometre	μm(um)	µm	US spelling: micrometer	0.000001
	nanometre	nm	nm	US spelling: nanometer	0.000000001
non-SI metric	ångström	Å (angstrom)	Å		0.0000000001
Imperial & US customary	mile	mi	mi		1,609.344	mi km
	furlong	furlong			201.168
	chain	chain			20.1168
	rod	rd	rd	For other names of this unit see the full list.	5.0292
	fathom	fathom		assumes 1 fathom ≡ 6 ft	1.8288
	yard	yd	yd	assumes the international definition	0.9144
	foot	ft(foot)	ft	The foot code will produce foot as the plural form.	0.3048	ft m (foot m)
	hand	hand	h		0.1016
	inch	in	in		0.0254	in cm in mm
Other	nautical mile	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	1,852
	parsec	pc	pc		3.0856775814672×10^16
	light-year	ly	ly		9.4607304725808×10^15
	astronomical unit	AU	AU		149,597,870,700
AREA (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/m2	combinations
SI	square kilometre	km2	km2	US spelling: square kilometer	1,000,000	km2 sqmi
	square metre	m2	m2	US spelling: square meter	1	m2 sqft
	square centimetre	cm2	cm2	US spelling: square centimeter	0.0001	cm2 sqin
	square millimetre	mm2	mm²	US spelling: square millimeter	0.000001	mm2 sqin
non-SI metric	hectare	ha	ha		10,000
Imperial & US customary	square mile	sqmi	sq mi		2,589,988.110336	sqmi km2
	acre	acre			4,046.856422
	square yard	sqyd	sq yd		0.83612736
	square foot	sqft (sqfoot)	sq ft	The sqfoot code will produce square foot as the plural form.	0.09290304	sqft m2 (sqfoot m2)
	square inch	sqin	sq in		0.00064516	sqin cm2
Other	square nautical mile	sqnmi	sq nmi		3,429,904
	dunam	dunam		For alternative spellings and definitions see the full list	1,000
	tsubo	tsubo			(400/121)
VOLUME (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/m3	combinations
SI	cubic metre	m3	m3	US spelling: cubic meter one kilolitre	1
	cubic centimetre	cm3	cm3	US spelling: cubic centimeter one millilitre	0.000001
		cc	cc
	cubic millimetre	mm3	mm³	US spelling: cubic millimeter	0.000000001
non-SI metric	kilolitre	kl	kl	US spelling: kiloliter one cubic metre	1
		kL	kL
	litre	l	l	US spelling: liter one cubic decimetre Triple combinations are also possible. See the full list.	0.001	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl	cl	US spelling: centiliter	0.00001
		cL	cL
	millilitre	ml	ml	US spelling: milliliter one cubic centimetre	0.000001	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cubic yard	cuyd	cu yd		0.764554857984
	cubic foot	cuft(cufoot)	cu ft	The cufoot code will produce cubic foot as the plural form.	0.028316846592
	cubic inch	cuin	cu in		0.000016387064
Imperial	barrel	impbbl	imp bbl	36 imp gal	0.16365924
	bushel	impbsh	imp bsh	8 imp gal	0.03636872
		impbu	imp bu
	gallon	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Triple combinations are also possible. See the full list.	0.00454609	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	quart	impqt	imp qt	1/4 imp gal or 40 imp fl oz	0.0011365225
	pint	imppt	imp pt	1/8 imp gal or 20 imp fl oz	0.00056826125
	fluid ounce	impoz(impfloz)	imp fl oz	1/160 imp gal	0.0000284130625	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	barrel	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	0.119240471196
		U.S.bbl	U.S. bbl
	barrel	oilbbl	bbl	42 US gal	0.158987294928
	beer barrel	USbeerbbl (usbeerbbl)	US bbl		0.117347765304
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	gallon	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Triple combinations are also possible. See the full list.	0.003785411784	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	quart	USqt	US qt	1/4 US gal or 32 US fl oz	0.000946352946
		U.S.qt	U.S. qt
	pint	USpt	US pt	1/8 US gal or 16 US fl oz	0.000473176473
		U.S.pt	U.S. pt
	fluid ounce	USoz (USfloz)	US fl oz	1/128 US gal	0.0000295735295625	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	barrel	USdrybbl	US bbl	105/32 US bsh	0.11562819898508
		U.S.drybbl	U.S. bbl
	bushel	USbsh	US bsh	2150.42 cubic inches by definition	0.03523907016688
		USbu	U.S. bu
		U.S.bsh	U.S. bsh
		U.S.bu	U.S. bu
	dry gallon	USdrygal	US dry gal	1/8 US bsh Triple combinations are also possible. See the full list.	0.00440488377086	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	dry quart	USdryqt	US dry qt	1/32 US bsh	0.001101220942715
		U.S.dryqt	U.S. dry qt
	dry pint	USdrypt	US dry pt	1/32 US bsh	0.0005506104713575
		U.S.drypt	U.S. dry pt
SPEED (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/(m/s)	combinations
SI	metre per second	m/s	m/s	US spelling: meter per second	1	m/s ft/s (m/s foot/s)
non-SI metric	kilometre per hour	km/h	km/h	US spelling: kilometer per hour	(5/18)	km/h mph
Imperial & US customary	mile per hour	mph	mph		0.44704	mph km/h mph kn
	foot per second	ft/s(foot/s)	ft/s	The foot/s code will produce foot per second as the plural form.	0.3048	ft/s m/s
Maritime units	knot	kn (knot)	kn		(4.63/9)	kn mph
FORCE (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/N	combinations
SI GN LT-f GN LTf GN ST-f GN STf MN LT-f MN LTf MN ST-f MN STf kN LT-f kN LTf kN ST-f kN STf N lb-f N lbf N oz-f N ozf mN oz-f mN ozf mN gr-f mN grf μN gr-f μN grf nN gr-f nN grf
	cgs
		Metric gravitational units
			Avoirdupois-based units LT-f ST-f LTf STf ST-f LT-f STf LTf
				ENERGY (Full list)
	system			unit	code (alternative)	abbreviation	notes	conversion factor/J	combinations
	SI
cgs
				Watt-hour multiples
					Electronvolt multiples
Calorie multiples
		pound/ounce-foot/ inch-hour-minute-second
						British thermal unit
							TNT-based units
			Other
TEMPERATURE (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion to kelvin	combinations
SI	kelvin	K	K	Triple combinations are also possible. See the full list.	[K]	K °C (K C) K °R (K R) K °F (K F)
	degree Celsius	°C (C)	°C		([°C]+273.15)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	degree Rankine	°R (R)	°R		([°R]/1.8)	°R K (R K) °R °C (R C) °R °F (R F)
	degree Fahrenheit	°F (F)	°F		(([°F]+459.67)/1.8)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Example:  {{사용자:배우는사람/틀:Convert|5|C-change}}
	Fahrenheit change	F-change		Example:  {{사용자:배우는사람/틀:Convert|10|F-change}}
MASS (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/kg	combinations
SI	kilogram	kg	kg	Triple combinations are also possible. See the full list.	1	kg lb kg st
	gram	g	g		0.001	g oz mg gr
	non-SI metric t LT t ST MT LT MT ST
		Avoirdupois LT t LT MT LT ST ST t ST MT ST LT
stone	st		st	14 lb used mostly in the British Commonwealth except Canada Triple combinations are also possible. See the full list.	6.35029318	st kg st lb
pound	lb		lb	Triple combinations are also possible. See the full list.	0.45359237	lb kg lb st
ounce	oz		oz		0.028349523	oz g
Troy	troy ounce		ozt	ozt		0.0311034768
other
TORQUE (Full list)
system	unit	code	abbreviation	notes	conversion factor/N·m	combinations
Industrial
SI	newton metre	Nm	N·m	Triple combinations are also possible. See the full list.	1	Nm kg-m Nm ft-lb
Non-SI metric	kilogram-meter	kg-m	kg-m		9.80665	kg-m Nm kg-m ft-lb
Imperial & US customary	foot-pound	ft-lb	ft-lb		1.3558	ft-lb Nm ft-lb kg-m
Scientific
SI	newton metre	N-m	N·m	Triple combinations are also possible. See the full list.	1	N-m kgf-m N-m lbf-ft
Non-SI metric	kilogram-force meter	kgf-m	kgf·m		9.80665	kgf-m N-m kgf-m lbf-ft
Imperial & US customary	pound-foot	lbf-ft	lbf·ft		1.3558	lbf-ft N-m lbf-ft kgf-m
PRESSURE
	unit	code	abbreviation		conversion factor/Pa
사용자:배우는사람/틀:Convert/GPa‎ 사용자:배우는사람/틀:Convert/MPa‎ 사용자:배우는사람/틀:Convert/kPa‎ 사용자:배우는사람/틀:Convert/hPa‎ 사용자:배우는사람/틀:Convert/Pa‎ 사용자:배우는사람/틀:Convert/mPa‎ 사용자:배우는사람/틀:Convert/mbar‎ 사용자:배우는사람/틀:Convert/mb‎ 사용자:배우는사람/틀:Convert/dbar‎ 사용자:배우는사람/틀:Convert/bar‎ 사용자:배우는사람/틀:Convert/kBa‎ 사용자:배우는사람/틀:Convert/Ba‎ 사용자:배우는사람/틀:Convert/atm‎ 사용자:배우는사람/틀:Convert/Torr‎ 사용자:배우는사람/틀:Convert/mmHg‎ 사용자:배우는사람/틀:Convert/inHg‎ 사용자:배우는사람/틀:Convert/psi‎
	FUEL EFFICIENCY
		unit	code (alternative)		notes		combinations
		kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
		litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
		litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
		miles per imperial gallon	mpgimp				mpgimp mpgus
		miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
		imperial gallons per mile	impgal/mi				impgal/mi
		US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
	The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
	POWER
	Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
	POPULATION DENSITY
		unit	code (alternative)		notes		combinations
		inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
		per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
inhabitants per hectare		PD/ha				PD/ha PD/acre
per hectare		/ha				/ha /acre
inhabitants per square mile		PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
per square mile		/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
inhabitants per acre		PD/acre				PD/acre PD/ha
per acre		/acre				/acre /ha

Examples

• Monitor quality or look at examples at {{사용자:배우는사람/틀:Convert/check}}.

See also

• {{사용자:배우는사람/틀:Convinfobox}} for use in infoboxes
• {{사용자:배우는사람/틀:Bbl to t}} for converting barrel of oil to tonnes
• {{사용자:배우는사람/틀:CwtQtrLb to kg}} for converting long hundred weights, quarters and pounds into kilograms
• {{사용자:배우는사람/틀:Decdeg}} for converting degrees, minutes and seconds to decimal degrees
• {{사용자:배우는사람/틀:HMS2Deg}} for converting hour angles, given in hours, minutes and seconds, to decimal degrees
• {{사용자:배우는사람/틀:Height}} for converting and displaying a person's height
• {{사용자:배우는사람/틀:Miles-chains}} for converting miles and chains to kilometres linking "chains"
• {{사용자:배우는사람/틀:Pop density}} for converting a population and area to a density
• {{사용자:배우는사람/틀:Inflation}} for calculating inflated prices
• {{사용자:배우는사람/틀:Metricate}}
• {{사용자:배우는사람/틀:RailGauge}} for converting rail (track) gauges

• {{Convinfobox}} for use in infoboxes
• {{Bbl to t}} for converting barrel of oil to tonnes
• {{CwtQtrLb to kg}} for converting long hundred weights, quarters and pounds into kilograms
• {{Decdeg}} for converting degrees, minutes and seconds to decimal degrees
• {{HMS2Deg}} for converting hour angles, given in hours, minutes and seconds, to decimal degrees
• {{Height}} for converting and displaying a person's height
• {{Miles-chains}} for converting miles and chains to kilometres linking "chains"
• {{Pop density}} for converting a population and area to a density
• {{Inflation}} for calculating inflated prices
• {{Metricate}}
• {{RailGauge}} for converting rail (track) gauges