사용자:FriedC/도시 정보/설명문서

This template should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera - in fact, any subdivision below the level of a country, for which {{Infobox Country}} should be used. Available fields are described in the table below. For questions see the talk page.

Redirects and calls

The following 0 templates call this one: Category:Templates calling Infobox settlement

The following Infobox templates redirect here:

• Administrative division
• area
• borough
• city
• county
• department
• district
• division
• hamlet
• location
• municipality
• neighborhood
• neighbourhood
• parish
• place
• province
• region
• state
• subdivision
• territory
• town
• township
• village
• voivod

Usage

• Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
• Expression Error may also be caused when any coordinate parameter has a value, but one or more coordinate parameters are blank of invalid.

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.

{{Infobox settlement
<!-- See Template:Infobox settlement for additional fields and descriptions -->
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| imagesize               = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_size               = 
| flag_alt                = 
| image_seal              = 
| seal_size               = 
| seal_alt                = 
| image_shield            = 
| shield_size             = 
| shield_alt              = 
| image_blank_emblem      = 
| blank_emblem_type       = 
| blank_emblem_size       = 
| blank_emblem_alt        = 
| nickname                = 
| motto                   = 
| image_map               = 
| mapsize                 = 
| map_alt                 = 
| map_caption             = 
| image_map1              = 
| mapsize1                = 
| map_alt1                = 
| map_caption1            = 
| image_dot_map           = 
| dot_mapsize             = 
| dot_map_base_alt        = 
| dot_map_alt             = 
| dot_map_caption         = 
| dot_x = |dot_y = 
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_mapsize         = 
| pushpin_map_caption     = 
| latd  =  |latm  =  |lats  =  |latNS  = 
| longd =  |longm =  |longs =  |longEW = 
| coor_pinpoint           = 
| coordinates_type        = 
| coordinates_display     = inline,title
| coordinates_footnotes   = 
| subdivision_type        = [[List of sovereign states|Country]]
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| established_title       = 
| established_date        = 
| founder                 = 
| named_for               = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| government_type         = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| leader_title1           = 
| leader_name1            = 
| total_type              = 
| unit_pref               = 
| area_magnitude          = 
| area_footnotes          = 
| area_total_km2          = 
| area_total_sq_mi        = 
| area_total_dunam        = 
| area_land_km2           = 
| area_land_sq_mi         = 
| area_water_km2          = 
| area_water_sq_mi        = 
| area_water_percent      = 
| elevation_footnotes     = 
| elevation_m             = 
| elevation_ft            = 
| population_footnotes    = 
| population_total        = 
| population_as_of        = 
| population_density_km2  = 
| population_density_sq_mi= 
| population_est          = 
| pop_est_as_of           = 
| population_demonym      = 
| population_note         = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| website                 = 
| footnotes               = 
}}

Complete empty syntax, with comments

This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

{{Infobox settlement
<!-- See Template:Infobox settlement for additional fields and descriptions -->
| name                    = <!-- at least one of the first two fields must be filled in -->
| official_name           = 
| native_name             = <!-- if different from the English name -->
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| other_name              = 
| settlement_type         = <!-- such as Town, Village, City, Borough etc. -->
<!-- transliteration(s) -------->
| translit_lang1          = 
| translit_lang1_type     = 
| translit_lang1_info     = 
| translit_lang1_type1    = 
| translit_lang1_info1    = 
| translit_lang1_type2    = 
| translit_lang1_info2    = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 -->
| translit_lang2          = 
| translit_lang2_type     = 
| translit_lang2_info     = 
| translit_lang2_type1    = 
| translit_lang2_info1    = 
| translit_lang2_type2    = 
| translit_lang2_info2    = 
| translit_lang2_info2    = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 -->
<!-- images, nickname, motto --->
| image_skyline           = 
| imagesize               = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_size               = 
| flag_alt                = 
| flag_link               =
| image_seal              = 
| seal_size               = 
| seal_alt                = 
| seal_link               = 
| image_shield            = 
| shield_size             = 
| shield_alt              = 
| shield_link             = 
| image_blank_emblem      = 
| blank_emblem_type       = <!-- defaults to Logo -->
| blank_emblem_size       = 
| blank_emblem_alt        = 
| blank_emblem_link       = 
| nickname                = 
| motto                   = 
| anthem                  = 
<!-- maps and coordinates ------>
| image_map               = 
| mapsize                 = 
| map_alt                 = 
| map_caption             = 
| image_map1              = 
| mapsize1                = 
| map_alt1                = 
| map_caption1            = 
| image_dot_map           = 
| dot_mapsize             = 
| dot_map_base_alt        = 
| dot_map_alt             = 
| dot_map_caption         = 
| dot_x = |dot_y = 
| pushpin_map             = <!-- name of a location map as per Template:Location_map -->
| pushpin_label_position  = <!-- position of the pushpin label: left, right, top, bottom, none -->
| pushpin_map_alt         = 
| pushpin_mapsize         = 
| pushpin_map_caption     =  
| pushpin_map1            = 
| pushpin_label_position1 = 
| pushpin_map_alt1        = 
| pushpin_mapsize1        = 
| pushpin_map_caption1    = 
| latd  =  |latm  =  |lats  =  |latNS  = 
| longd =  |longm =  |longs =  |longEW = 
| coor_pinpoint           = <!-- to specify exact location of coordinates (was coor_type) -->
| coordinates_type        = 
| coordinates_display     = inline,title
| coordinates_footnotes   = <!-- for references: use <ref> tags -->
<!-- location ------------------>
| subdivision_type        = [[List of sovereign states|Country]]
| subdivision_name        = <!-- the name of the country -->
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = <!-- etc., subdivision_type6 / subdivision_name6 -->
<!-- established --------------->
| established_title       = <!-- Settled -->
| established_date        = 
| established_title1      = <!-- Incorporated (town) -->
| established_date1       = 
| established_title2      = <!-- Incorporated (city) -->
| established_date2       = 
| established_title3      = 
| established_date3       = 
| extinct_title           = 
| extinct_date            = 
| founder                 = 
| named_for               = 
<!-- seat, smaller parts ------->
| seat_type               = <!-- defaults to: Seat -->
| seat                    = 
| parts_type              = <!-- defaults to: Boroughs -->
| parts_style             = <!-- list, coll (collapsed list), para (paragraph format) -->
| parts                   = <!-- parts text, or header for parts list -->
| p1                      = 
| p2                      = <!-- etc., up to p50: for separate parts to be listed-->
<!-- government type, leaders -->
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         = 
| leader_party            = 
| leader_title            = 
| leader_name             = <!-- add &nbsp; (no-break space) to disable automatic links -->
| leader_title1           = 
| leader_name1            = <!-- etc., up to leader_title4 / leader_name4 -->
<!-- display settings  --------->
| total_type              = <!-- to set a non-standard label for total area and population rows -->
| unit_pref               = <!-- enter: Imperial, to display imperial before metric -->
<!-- area ---------------------->
| area_footnotes          = <!-- for references: use <ref> tags -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| area_total_km2          = <!-- ALL fields with measurements have automatic unit conversion -->
| area_total_sq_mi        = <!-- see table @ Template:Infobox settlement for details -->
| area_total_dunam        = <!-- used in Middle East articles only -->
| area_land_km2           = 
| area_land_sq_mi         = 
| area_water_km2          = 
| area_water_sq_mi        = 
| area_water_percent      = 
| area_urban_footnotes    = <!-- for references: use <ref> tags -->
| area_urban_km2          = 
| area_urban_sq_mi        = 
| area_metro_footnotes    = <!-- for references: use <ref> tags -->
| area_metro_km2          = 
| area_metro_sq_mi        = 
| area_rank               = 
| area_blank1_title       = 
| area_blank1_km2         = 
| area_blank1_sq_mi       = 
| area_blank2_title       = 
| area_blank2_km2         = 
| area_blank2_sq_mi       = 
<!-- elevation ----------------->
| elevation_footnotes     = <!-- for references: use <ref> tags -->
| elevation_m             = 
| elevation_ft            = 
| elevation_max_footnotes = <!-- for references: use <ref> tags -->
| elevation_max_m         = 
| elevation_max_ft        = 
| elevation_min_footnotes = <!-- for references: use <ref> tags -->
| elevation_min_m         = 
| elevation_min_ft        = 
<!-- population ---------------->
| population_footnotes    = <!-- for references: use <ref> tags -->
| population_total        = 
| population_as_of        = 
| population_rank         = 
| population_density_km2  = <!-- for automatic calculation of any density field, use: auto -->
| population_density_sq_mi= 
| population_est          = 
| pop_est_as_of           = 
| population_urban        = 
| population_density_urban_km2   = 
| population_density_urban_sq_mi = 
| population_metro        = 
| population_density_metro_km2   = 
| population_density_metro_sq_mi = 
| population_density      = 
| population_density_rank = 
| population_blank1_title = 
| population_blank1       = 
| population_density_blank1_km2  = 
| population_density_blank1_sq_mi= 
| population_blank2_title = 
| population_blank2       = 
| population_density_blank2_km2  = 
| population_density_blank2_sq_mi= 
| population_demonym      = <!-- demonym, ie. Liverpudlian for someone from Liverpool -->
| population_note         = 
<!-- demographics (section 1) -->
| demographics_type1      = 
| demographics1_footnotes = <!-- for references: use <ref> tags -->
| demographics1_title1    = 
| demographics1_info1     = <!-- etc., up to demographics1_title5 / demographics1_info5 -->
<!-- demographics (section 2) -->
| demographics_type2      = 
| demographics2_footnotes = <!-- for references: use <ref> tags -->
| demographics2_title1    = 
| demographics2_info1     = <!-- etc., up to demographics2_title5 / demographics2_info5 -->
<!-- time zone(s) -------------->
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| timezone2               = 
| utc_offset2             = 
| timezone2_DST           = 
| utc_offset2_DST         = 
<!-- postal codes, area code --->
| postal_code_type        = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal_code             = 
| postal2_code_type       = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal2_code            = 
| area_code_type          = <!-- defaults to: Area code(s) -->
| area_code               = 
| geocode                 =
| iso_code                = 
| registration_plate      =
<!-- twin cities --------------->
| twin1                   = 
| twin1_country           = 
| twin2                   = 
| twin2_country           = <!-- etc., up to twin9 / twin9_country -->
<!-- blank fields (section 1) -->
| blank_name_sec1         = 
| blank_info_sec1         = 
| blank1_name_sec1        = 
| blank1_info_sec1        = 
| blank2_name_sec1        = 
| blank2_info_sec1        = <!-- etc., blank6_name_sec1 / blank6_info_sec1 -->
<!-- blank fields (section 2) -->
| blank_name_sec2         = 
| blank_info_sec2         = 
| blank1_name_sec2        = 
| blank1_info_sec2        = 
| blank2_name_sec2        = 
| blank2_info_sec2        = <!-- etc., blank6_name_sec2 / blank6_info_sec2 -->
<!-- website, footnotes -------->
| website                 = 
| footnotes               = 
}}

매개 변수 항목과 설명

이름과 음역
항목	사용	설명
이름	정식표기가 없을 경우 필요함	평소에 쓰이는 한국어 명칭
정식표기	이름이 없을 경우 필요함	공식적으로 쓰이는 한국어 명칭
원어표기	선택	이름/정식표기 아래에 표시
원어표기언어	선택	Use ISO 639-2 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead.
다른이름	선택	봄베이나 사이공처럼 이전에 썼거나 보편적으로 쓰이는 명칭
도시유형	선택	Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either name or official_name is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban or Metro (if urban and metro figures are not present, the label is Total unless total_type is set).
Transliteration(s)
외국어표기1	선택	Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article.
외국어표기1형태 외국어표기1형태1 to 외국어표기1형태6	선택
외국어표기1정보 외국어표기1정보1 to 외국어표기1정보6	선택
외국어표기2	선택	Will place a second transliteration. See Dêlêg
외국어표기2형태 외국어표기2형태1 to 외국어표기2형태6	선택
외국어표기2정보 외국어표기2정보1 to 외국어표기2정보6	선택
Images, Nickname, Motto
Parameter name	Usage	Description
Skyline image
image_skyline	선택	Despite the name it can be any image that an editor wishes. Default size will be 250px
imagesize	선택	Can be used to tweak the size of the image_skyline up or down. This can can helpful if an editor want to make the infobox wider.
image_alt	선택	Alt text for the image, used by visually-impaired readers who cannot see the image. See WP:ALT.
image_caption	선택	Will place a caption under the image_skyline (if present)
Flag image
image_flag	선택	Used for a flag. Default size:100px
flag_size	선택	Can be used to tweak the size of the image_flag up or down from 100px as desired.
flag_alt	선택	Alt text for the flag.
flag_link	선택
Seal image
image_seal	선택	If the place has an official seal.
seal_size	선택	기본값은 100px.
seal_alt	선택	Alt text for the seal.
seal_link	선택
Coat of arms image
image_shield	선택	Can be used for a place with a coat of arms.
shield_size	선택	기본값은 100px.
shield_alt	선택	Alt text for the shield.
shield_link	선택	Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.
Logo or emblem image
image_blank_emblem	선택	Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See Kingston upon Hull's infobox for an example. Deprecated name =city_logo
blank_emblem_type	선택	To specify what type of emblem "image_blank_emblem" is. The default is Logo.
blank_emblem_size	선택	기본값은 100px. Deprecated name =citylogo_size
blank_emblem_alt	선택	Alt text for blank emblem.
blank_emblem_link	선택	Deprecated name =logo_link
Nickname and Motto
nickname	선택	well-known nickname(s)
motto	선택	Will place the motto under the nicknames
anthem	선택	Will place the anthem (song) under the nicknames
지도 및 좌표
항목	사용	설명
Map images
image_map	선택
mapsize	선택	Default is 250px.
map_alt	선택	Alt text for map.
map_caption	선택
image_map1	선택	A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1	선택	Default is 250px.
map_alt1	선택	Alt text for secondary map.
map_caption1	선택
Dot map
image_dot_map	선택	A field for manually superimposing a dot over a blank map using an "X" & "Y" system. Blank maps, if available, can be found over at Wikimedia Commons. Example see: Rainbow Lake, Alberta
dot_mapsize	선택	To change the dot map size; default is 180px.
dot_map_base_alt	선택
dot_map_alt	선택	Alt text for the dot map.
dot_map_caption	선택	For placing a caption under the dot map.
dot_x dot_y	선택	For manually superimposing the dot left/right and up/down on the map.
Pushpin map(s), Coordinates
pushpin_map	선택	The name of a location map as per Template:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin coordinate marker and label on the map automatically. Example see: Padang, Indonesia
pushpin_label_position	선택	The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
pushpin_map_alt	선택	Alt text for pushpin map.
pushpin_mapsize	선택	Must be entered as only a number—no need for px. The default value is 250.
pushpin_map_caption	선택	Fill out if a different caption from map_caption is desired.
pushpin_map1	선택	Set of parameters for second pushpin map
pushpin_label_position1	선택
pushpin_map_alt1	선택
pushpin_mapsize1	선택
pushpin_map_caption1	선택
latd	선택	Latitude degrees. Can also be used for decimal degrees.
latm	선택	Latitude minutes
lats	선택	Latitude seconds
latNS	선택	Latitude North or South (enter N or S).
longd	선택	Longitude degrees. Can also be used for decimal degrees.
longm	선택	Longitude minutes
longs	선택	Longitude seconds
longEW	선택	Longitude East or West (enter E or W).
Coordinates display
coor_pinpoint	선택	If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship Deprecated name =coor_type
coordinates_type	선택	Can be used to override the default type and region for coordinates. If coordinates_type is not used: region will be set according to "subdivision_name", e.g. subdivision_name = United Kingdom will generate coordinates with "region:GB". For Canada and the United States, in addition, "subdivision_name1" will be used, e.g. subdivision_name = Canada and subdivision_name1 = Ontario => "region:CA-ON". type is set to "type:city". If population_total is a number, it is set to type:city(population_total). If the population_total field includes text, symbols or commas, "type:city" is used instead. If coordinates_type is needed, to specify region, type and scale in accordance with how it is done at {{coord}}, i.e. |coordinates_type =region:GB_type:city_scale:1000. See Birmingham or Pie Town for examples.
coordinates_display	선택	If the field is empty or not used, the coordinates will be displayed in the infobox only. Any value will have the coordinates displayed in the article's title as well. Infobox settlement uses {{Geobox coor}} to call {{Coord}} with the parameter "display=inline,title".
coordinates_footnotes	선택	Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
Location, Established, Seat, Subdivisions, Government, Leaders
Parameter name	Usage	Description
Location
subdivision_type	선택	almost always "Country"
subdivision_name	선택	Depends on the subdivision_type - use the name in text form, sample: United States or [[United States]], don't add flag icons or flag templates in this field.
subdivision_type1 to subdivision_type6	선택	Can be State/Province, region, county.
subdivision_name1 to subdivision_name6	선택	Use the name in text form, sample: Florida or [[Florida]]. Don't add flag icons or flag templates in this field.
Established
established_title	선택	Example: First settled
established_date	선택
established_title1	선택	Example: Incorporated (town)
established_date1	선택
established_title2	선택	Example: Incorporated (city)
established_date2	선택
established_title3	선택
established_date3	선택
extinct_title	선택	For when a settlement ceases to exist
extinct_date	선택
founder	선택	The name of the settlement's founder
named_for	선택	The source of the name of the settlement (a person, a place, et cetera)
Seat of government
seat_type	선택	The label for the seat of government (defaults to Seat).
seat	선택	The seat of government.
Smaller parts (e.g. boroughs of a city)
parts_type	선택	The label for the smaller subdivisions (defaults to Boroughs).
parts_style	선택	Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts	선택	Text or header of the list of smaller subdivisions.
p1 p2 to p50	선택	The smaller subdivisions to be listed. Example: Warsaw
Government type, Leaders
government_footnotes	선택	Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
government_type	선택	Example: Mayor-council government
leader_party	선택	Political party of the place's leader
leader_title	선택	First title of the place's leader, e.g. Mayor
leader_name	선택	Name of the place's leader
leader_title1 to leader_title4	선택
leader_name1 to leader_name4	선택	For long lists use {{Collapsible list}}. See Halifax for an example.
Geographic information
These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Parameter name	Usage	Description
Display settings
total_type	선택	Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. For no label, can be set to &nbsp; (this precise value also causes the total population to be displayed on the same line as the word Population).
unit_pref	선택	To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK. For the middle east, a unit preference of dunam can be entered (only affects total area). All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
Area
area_footnotes	선택	Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
area_magnitude	선택	Area magnitude of total_area in terms of m2. Should enter 1 E+6 for area of 1.0 km2. See 1 E+6 m²
area_total_km2	선택	Total area in square kilometers—symbol: km2, which is wiki-linked. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty. Deprecated name =area_total
area_total_sq_mi	선택	Total area in square miles—symbol: sq mi, which is wiki-linked. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty. Deprecated name =TotalArea_sq_mi
area_total_dunam	선택	Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers and square miles if area_total_km2 and area_total_sq_mi are empty. Examples: Gaza and Ramallah
area_land_km2	선택	Land area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty. Deprecated name =area_land
area_land_sq_mi	선택	Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty. Deprecated name =LandArea_sq_mi
area_water_km2	선택	Water area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty. Deprecated name =area_water
area_water_sq_mi	선택	Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty. Deprecated name =WaterArea_sq_mi
area_water_percent	선택	percent of water without the "%"
area_urban_km2	선택	Deprecated name =area_urban
area_urban_sq_mi	선택	Deprecated name =UrbanArea_sq_mi
area_metro_km2	선택	Deprecated name =area_metro
area_metro_sq_mi	선택	Deprecated name =MetroArea_sq_mi
area_rank	선택	The settlement's area, as ranked within its parent sub-division
area_blank1_title	선택	Example see London
area_blank1_km2	선택
area_blank1_sq_mi	선택
area_blank2_title	선택
area_blank2_km2	선택
area_blank2_sq_mi	선택
Elevation
elevation_footnotes	선택	Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
elevation_m	선택	Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, the editor must enter a converted range in the elevation_ft field to over-ride the automatic conversion. use the "max" and "min" fields below Deprecated name =elevation
elevation_ft	선택	Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (i.e. 50–500 ft ) is desired, the editor must enter a converted range in the elevation_m field to over-ride the automatic conversion. use the "max" and "min" fields below
elevation_max_footnotes elevation_min_footnotes	선택	Same as above, but for the "max" and "min" elevations. See Leeds.
elevation_max_m elevation_max_ft elevation_min_m elevation_min_ft	선택	Used to give highest & lowest elevations, instead of just a single value. Example: Halifax Regional Municipality.
Population, Demographics
The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice-versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value.
Parameter name	Usage	Description
Population
population_footnotes	선택	Reference(s) for population, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
population_total	선택	Actual population (see below for estimates)
population_as_of	선택	The year for the population total (usually a census year)
population_density_km2	선택	Deprecated name =population_density
population_density_sq_mi	선택	Deprecated name =population_density_mi2
population_est	선택	Population estimate.
pop_est_as_of	선택	The year or month & year of the population estimate
population_urban_footnotes	선택	Reference(s) for urban population, placed within <ref> </ref> tags
population_urban	선택
population_density_urban_km2	선택
population_density_urban_sq_mi	선택	Deprecated name =population_density_urban_mi2
population_metro_footnotes	선택	Reference(s) for metro population, placed within <ref> </ref> tags
population_metro	선택
population_density_metro_km2	선택
population_density_metro_sq_mi	선택	Deprecated name =population_density_metro_mi2
population_rank	선택	The settlement's population, as ranked within its parent sub-division
population_density_rank	선택	The settlement's population density, as ranked within its parent sub-division
population_blank1_title	선택	Can be used for estimates. Example: Windsor, Ontario
population_blank1	선택	The population value for blank1_title
population_density_blank1_km2	선택
population_density_blank1_sq_mi	선택
population_blank2_title	선택
population_blank2	선택
population_density_blank2_km2	선택
population_density_blank2_sq_mi	선택
population_demonym	선택	A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example citizens in Liverpool are known as Liverpudlians.
population_note	선택	A place for additional information such as the name of the source. See Windsor, Ontario for example.
Demographics (section 1)
demographics_type1	선택	Section Header. For example: Ethnicity
demographics1_footnotes	선택	Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics1_title1 to demographics1_title5	선택	Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1 to demographics1_info5	선택	Information related to the "titles". For example: 50%, 25%, 10%...
Demographics (section 2)
demographics_type2	선택	A second section header. For example: Languages
demographics2_footnotes	선택	Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics2_title1 to demographics2_title5	선택	Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1 to demographics2_info5	선택	Information related to the "titles" for type2. For example: 50%, 25%, 10%...
Other information
Parameter name	Usage	Description
Time zone(s)
timezone1	선택
utc_offset1	선택
timezone1_DST	선택
utc_offset1_DST	선택
timezone2	선택	A second timezone field for larger areas such as a Province.
utc_offset2	선택
timezone2_DST	선택
utc_offset2_DST	선택
Postal code(s) & area code
postal_code_type	선택
postal_code	선택
postal2_code_type	선택
postal2_code	선택
area_code_type	선택	If left blank/not used template will default to "Area code(s)"
area_code	선택
geocode	선택	See Geocode
iso_code	선택	See ISO 3166
registration_plate	선택	See Vehicle registration plate
Twin cities
twin1 to twin9	선택	Name of a twin city
twin1_country to twin9_country	선택	Country of the twin city
Blank fields (section 1)
blank_name_sec1	선택	Fields used to display other information. The name is displayed in bold on the left side of the infobox.
blank_info_sec1	선택	The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw
blank1_name_sec1 to blank6_name_sec1	선택	Up to 6 additional fields (7 total) can be displayed in this section
blank1_info_sec1 to blank6_info_sec1	선택
Blank fields (section 2)
blank_name_sec2	선택	For a second section of blank fields
blank_info_sec2	선택	Example: Beijing
blank1_name_sec2 to blank6_name_sec2	선택	Up to 6 additional field (7 total) can be displayed in this section
blank1_info_sec2 to blank6_info_sec2	선택
Website, Footnotes
website	선택	External link to official website, suggested format is [http://www.detroitmi.gov/ www.detroitmi.gov] which prevents unnecessary display of leading http://
footnotes	선택	Text to be displayed at the bottom of the infobox

Example

from Detroit, Michigan -- Note Pipe characters are in front of the line of cell data, instead of at the end of the line, which simplify the spacing:

{{Infobox settlement
<!-- See Template:Infobox settlement for additional fields and descriptions -->
| name                    = Detroit
| settlement_type         = City
| official_name           = City of Detroit
| image_skyline           = DetroitSkyline.jpg
| image_alt               = Tall buildings with city lights at dusk, reflected over still dark water
| image_caption           = Skyline of Detroit
| image_flag              = Detroit flag.png
| flag_alt                = Quartered flag. Top left: blue with 17 white stars. Top right: Red with 3 golden lions. Bottom left: White with 5 gold fleur-de-lis. Bottom right: 13 alternating white and red stripes, diagonally downward. Center is covered by the city seal in color
| image_seal              = Detroit Seal.png
| seal_alt                = Light blue seal with two women, "THE CITY OF DETROIT", "MICHIGAN", and the city motto in Latin
| nickname                = Motor City, Motown, Rock City, The D
| motto                   = "{{lang|la|Speramus Meliora; Resurget Cineribus}}"<br />([[Latin]] for, "We Hope For Better Things; It Shall Rise From the Ashes")
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| map_alt                 = Detroit covers most of the northeast part of Wayne County, which in turn is in the far southeast of Michigan.
| map_caption             = Location in [[Wayne County, Michigan|Wayne County]], [[Michigan]]
| latd  = 42 |latm  = 19 |lats  = 54 |latNS  = N
| longd = 83 |longm = 02 |longs = 51 |longEW = W
| coordinates_display     = yes
| coordinates_footnotes   = <ref name="GNIS">{{cite gnis|1617959|Detroit|2009-07-27}}.</ref>
| subdivision_type        = [[Countries of the world|Country]]
| subdivision_name        = [[United States]]
| subdivision_type1       = [[U.S. state|State]]
| subdivision_name1       = [[Michigan]]
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne County]]
| established_title       = Founded
| established_date        = [[1701]]
| established_title2      = Incorporation
| established_date2       = [[1806]]
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = D
| leader_title1           = City Council
| leader_name1            = {{Collapsible list
 |title       = Members' List
 |frame_style = border:none; padding: 0;
 |title_style = <!-- (optional) -->
 |list_style  = text-align:left;display:none; 
 |1           = • [[Kenneth Cockrel, Jr.]] - Council President
 |2           = • ''(Vacant)''
 |3           = • [[JoAnn Watson]]
 |4           = • [[Sheila Cockrel]]
 |5           = • [[Barbara-Rose Collins]]
 |6           = • [[Alberta Tinsley-Talabi]]
 |7           = • [[Martha Reeves]]
 |8           = • [[Brenda Jones (politician)|Brenda Jones]]
 |9           = • [[Kwame Kenyatta]]
}}
| area_footnotes          = 
| area_magnitude          = 1 E8
| area_total_sq_mi        = 143.0
| area_land_sq_mi         = 138.8
| area_water_sq_mi        = 4.2
| area_urban_sq_mi        = 1295
| area_metro_sq_mi        = 3913
| elevation_footnotes     = <ref name="GNIS" />
| elevation_ft            = 600
| population_footnotes    = <ref name="metro">{{cite web|url=http://www.census.gov/popest/metro/CBSA-est2008-annual.html|title=Annual Estimates of the Population of Combined Statistical Areas: April 1, 2000 to July 1, 2008|publisher=U.S. Census Bureau|accessdate=May 5, 2009}}</ref>
| population_as_of        = 2008 
| population_total        = 912062
| population_density_sq_mi= auto
| population_urban        = 3903377
| population_metro        = 4425110
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5354225 
| population_blank2_title = [[Demonym]]
| population_blank2       = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = -5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = -4
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standard|FIPS code]]
| blank_info              = 26-22000{{GR|2}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = 1617959{{GR|3}}
| blank2_name             = Major airport
| blank2_info             = [[Detroit Metropolitan Wayne County Airport]] (DTW)
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               = 
}}