Identifier: locomotiveengine10hill (find matches)
Title: Locomotive engineering : a practical journal of railway motive power and rolling stock
Year: 1892 (1890s)
Authors: Hill, John A. (John Alexander), 1858-1916 Sinclair, Angus, 1841-1919
Subjects: Railroads Locomotives
Publisher: New York : A. Sinclair, J.A. Hill (etc.)
Contributing Library: Carnegie Library of Pittsburgh
Digitizing Sponsor: Lyrasis Members and Sloan Foundation

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Images: All Images From Book
Click here to view book online to see this illustration in context in a browseable online version of this book.

Text Appearing Before Image:
ubes in locomotives, drivingrotary drills, valve-seat planers, cylinderboring-bars; furnishing blasts for portableforges, and power for hoists. As I have re-cently erected two large home-made airhoists, I take the libertj ol sending be done with old material, with the exer- me thought and ingenuity. In operation, air is admitti d to eai h i nd of cylinder, admission and discharge be-ing rolli I by a four way cock, giving a very pi pi and accurate movement. This hoist is located between machineshop and store room. The second iserected in the wheel-press room, in rear ofmachine shop; ha i a cj linder made of the (Ox 14 inch brake cylinders, similarly fastened together. This cylin-der swings from a trolley, which runs ontwo 8-inch I-beams which travel ontrai I at each end. which gives it move-ment in all directions, controlled at willby hand chains. Air is controlled in thiscj linder also bj a four way cock. These hoists work very satisfactorily;were erected at small cost, as principally
Text Appearing After Image:
CHEAP AIR HOIST. you a description of them and photographof the first (for which I am indebted to oneof my enginemen, who is almost as handytaking snap-shots as he is handling oneof the Baldwin 19 x 24 trailers with thefamous A. C. L. Florida Special Vesti-bule Train), which you may publish, ifyou see fit, as my contribution to thecurrent air-hoist literature. The view shows the hoist in the act oflifting an engine truck center casting. Aswill be noted, the cylinder of the hoist isbolted to one of the pillars, and pullsdown on the chain; it is made of seven10 x 14-inch coach-brake cylinders, whichhad been discarded on account of brokenflanges. These cylinders are arranged inline, and held together by rods, with nutson each end. As you will see, this makes a cheap,convenient and powerful hoist, with about8 feet lift, and is an example of what can old material w-as used; and they are muchadmired. For the benefit of any wishing to makeuse of such cylinders for this purpose, Iwill state t

Note About Images